Holden is the best place we work for matching original trim, and the reason is that the houses were built to a small number of standard patterns. The profile you need is usually still on the wall of a house two doors down.
Had them out after the back steps started going soft underfoot. He came and looked properly before quoting anything, and told me the structure underneath was still sound — so it ended up a smaller job than I had braced myself for. Turned up when he said he would, cleaned up after himself, and the price at the end was the price we agreed. Not much more you can ask for.
Owner replied
S
Skyler White
9 months ago
Called on a Tuesday and had someone out the same week. What I appreciated most was being told straight what needed doing now and what could safely wait until spring. No pressure and no trying to talk me into the bigger version of the job. It has held up fine through the winter since.
T
Trevor Alford
2 months ago
The quote came through itemised and the final bill matched it, which has honestly not been my experience with everyone around here. They worked around an awkward driveway without once making it my problem, and left the place tidier than they found it. Would have them back.
K
Kaleb Withrow
3 weeks ago
Fair price, showed up on time, tidy work. No complaints.
See something like yours?
Send a few photos and we'll tell you what it'll take — free written quote, no pressure.
Island Creek Coal built these houses to repeating plans across the numbered camps, which means the trim was repeating too. Same baseboard height, same casing, same corner blocks where they were used. Nearly a century on, that is a real advantage: when a section is missing or damaged, the original is usually still intact somewhere close by to measure from.
Matching original company-house baseboard and casing
Reproducing profiles from a section taken off an intact run
Corner blocks and plinths where the pattern used them
Replacing runs damaged by water off the hillside
Re-trimming rooms that were modernised out of character
Why Choose Mackwood Construction?
What you get when Mackwood does your interior trim — and what we won't do.
Free written quote, itemised before anything starts
We get underneath and look properly before quoting — not from the kerb
We'll tell you straight if a repair isn't worth doing
Based in Williamson — Mingo and Logan counties, about an hour out
Straight answers on permits, which differ either side of the county line
Built for this climate: drainage, flashing and ground contact done right
From first call to finished work — no surprises in between.
Step 1
Tell us about the project
Call, text, or send a message with what you're looking to build or repair. No form to fill in and no call centre — it comes straight to us, and you'll get a real answer about whether it's something we do.
Step 2
Send photos or schedule a look
A few photos are often enough to tell us what we're dealing with. Where it isn't — anything structural, anything hidden underneath — we'll come out and look properly before quoting rather than guessing from the kerb.
Step 3
Get a clear quote
You get a written quote that itemises the work, so you can see what you're paying for and what you aren't. If we think part of it isn't worth doing, we'll say so. No pressure and no surprises at the end.
Step 4
We build it right
We turn up when we said we would, work clean, and haul the offcuts away with us. The job gets built to last in this climate — and we'll walk it with you before we call it finished.
Not sure what your interior trim needs?
We'll come and look, then tell you straight — including if it isn't worth doing.
Can you match the original trim in a company house?
This is the best case for it. The houses were built to standard patterns, so the profile is usually still intact on the same street. We take an accurate section and reproduce it from stock pieces, or mill it where the run justifies that.
Why is the trim damaged only in the back rooms?
Because these houses are dug into the hill and water comes off the slope behind them. The damage concentrates on the uphill wall and low down, which inside means the back rooms and the trim nearest the floor.
Is custom milling worth it?
On a short run, rarely — building the profile up from two or three stock pieces gets close enough once painted. On a long run in a house where the original detail is intact elsewhere, it can be worth it, and we will price both.
My neighbour had the same work done. Does that help?
Often, yes. These houses share a plan, so what was found in theirs is a fair guide to yours, and the trim profile is confirmed rather than guessed.
Can you match the original detail on a company house?
Usually, and Holden is the best case for it. The houses were built to standard patterns, so the profile you need is generally still visible on the same street. Where something genuinely can't be sourced we'll show you the nearest option rather than substituting quietly.
My neighbour just had the same repair done. Does that mean mine is coming?
Quite possibly. These houses were built the same way at the same time on the same ground, so they tend to reach the same failures together. It's worth a look underneath before it becomes urgent.
The house is dug into the hill and the back is hard to get to. Is that an issue?
It's the normal situation in the camps and it's usually the side the work is on. It affects access and how long material handling takes, not whether the repair can be done properly.
Most people are buying a result, not a list of tasks. Pick a topic to see what we look at before quoting in Holden.
More on interior trim work in Holden
That takes the guesswork out of a match. Instead of approximating from a photograph, we can take a proper section off an undamaged run, work out how to reproduce it from stock pieces, and know it is right before anything is cut.
Where the profile genuinely cannot be built up from stock, having an accurate section is also what makes custom milling worth doing — and on a run long enough, milling to match is not the extravagance it sounds.
The back rooms are usually the ones that need it
These houses are set into the hillside, and water coming off the slope behind them is the constant. That means the damage concentrates on the back and the low side of the house — which inside translates to the rooms along the uphill wall, and the trim closest to the floor in them.
If your house follows the camp pattern, we generally know which rooms to look at before walking in. That is useful for a quote and it means we are not opening up rooms unnecessarily.
It also means the trim is worth checking when the exterior work gets done rather than as a separate job later, because the same wall is involved.
Access in the camps
About forty-five minutes from Williamson, US-119 to WV-44. The camps sit up off the main road on narrow streets laid out for the era, so the approach is tighter than the drive suggests and there is limited room to stage material.
For trim that mostly means carrying long stock further than usual. It is manageable and we allow for it rather than discovering it.
Because whole streets share a plan, if a neighbour has had the same work done we can often tell you what to expect from it before we quote.
Homes around Holden
Holden is a planned coal town rather than a town that grew, and it shows in the housing more clearly than anywhere else we work. Island Creek Coal built these houses to a small number of standard patterns across the numbered camps, which means whole streets share a floor plan, a porch detail, and a foundation type. For carpentry that is genuinely useful: once we have seen the failure on one of them we know where to look on the next, and matching original trim and porch detail is realistic because the pattern is documented by the houses around it.
What we see locally
These houses are approaching a century old and were built with untreated framing on block and stone piers, set into hillside sites where drainage was designed for the coal operation rather than for the houses. Water coming off the slope behind a house is the constant, and the damage concentrates at the back and the low side — sill plates, joist bearings, and the porch structure where it steps down the grade. The uniformity that helps us diagnose also means the whole street tends to arrive at the problem together.
Getting to the job
About forty-five minutes from Williamson, US-119 to WV-44. The camps sit up off the main road on narrow streets that were laid out for the era, so the approach is tighter than the drive suggests and there is limited room to stage material. Houses set into the hillside also mean the working side is often the awkward side, which affects the day rather than the price of the carpentry.
Get a free quote for interior trim in Holden
Tell us what you're building or repairing and get a clear, no-pressure quote. Free quotes, honest answers, and craftsmanship built to last.